PS-1F Benchtop Welding Positioner

MAC Model PS-1F-5-A Two Axis Welding Positioner

SAVE MONEY : We offer a much lower package price when you purchase your Model PS-1F welding positioner with either the MT6 or WP-200 chuck. 
  • MAC Model PS-1F welding positioner with WP-200 chuck $1,695.00 (Saves you $395.00) Our #1 Seller 
  • MAC Model PS-1F welding positioner with MT6 Chuck $1,595.00 (Saves you $295.00)
  • MAC Model PS-1F welding positioner with no chuck $1,495.00
Specifications Model PS-1F Welding Positioner

Capacity           
Maximum Load Capacity Table Flat Horizontal position – 200 pounds
Maximum Load Capacity using outboard roller support - 100 pounds

Maximum Load Capacity Table Tilted 90 degrees Vertical Position:
Rating @ 2 inch CG load height from table – 100 pounds
Rating @ 4 inch CG load height from table – 85 pounds
Rating @ 8 inch CG load height from table – 60 pounds
Rating @ 16 inch CG load height from table – 35 pounds

Maximum Rotation Load Torque – 100 inch-pound
Rating @ 2 inch CG Load Eccentricity from axis – 50 pounds
Rating @ 5 inch CG Load Eccentricity from axis – 20 pounds
Rating @ 8 inch CG Load Eccentricity from axis – 12.5 pounds

CG = Center of Gravity

Rotation

Motor: 35W 3000 rpm DC Variable speed.
Speed Range – Variable from 0.3 to 5 RPM
Speed Accuracy – 2 % of base speed.
Rotation Drive – Fully enclosed & lubricated self-locking worm gear.

Tilt 

Tilt Range – 90 degrees forward
Tilt Torque – Manual
Tilt Actuation – Hand Lever with clamp.
Table 

Round – 12 inch Diameter with centering grooves.
Number of Slots – 6 @ 60 degrees
Tee Nut bolt size – 1/4 inch
Inherent overhang – 4.65 inches

Welding Ground Conduction – 500 Amps thru spring loaded mechanical ground.

Primary Input power – AC 115 volts 60 Hz Single Phase 10 Amp.

Controls 

Internal Control box – With Power on indicator light & Foot control receptacle. 
Speed Control – One turn potentiometer
Directional Control – Forward-Stop-Reverse switch.
Overload Protection – 3 Amp motor fuse.
Dynamic braking – Brings table rotation to a quick stop.
Foot Switch – Remote start/stop with 10 feet of cable.

Frame – 4 anchor bolt holes.

Approximate shipping Weight – 67 lbs. Box – Can ship by UPS Ground.
SAVE MONEY : We offer a much lower package price when you purchase your Model PS-1F welding positioner with either the MT6 or WP-200 chuck. 
  • MAC Model PS-1F welding positioner with WP-200 chuck………$1,695.00 (Saves you $395.00) Our #1 Seller 
  • MAC Model PS-1F welding positioner with MT6 Chuck …………$1,595.00 (Saves you $295.00)
  • MAC Model PS-1F welding positioner with no chuck............……$1,495.00
PS-1F Welding Positioner
PS-1F Welding Positioner
Model PS-1F-5-A Options
Welding Chuck Option
MT6 – 3-jaw self-centering scroll chuck. Hardened reversible American standard jaws.  
Welding Chuck Option
MAC WP-200 welding chuck.
MT6 chuck mounted on the PS-1F bench-top welding positioner. $1,595.00
Above: MT6 chuck mounted on the PS-1F bench-top welding positioner. $1,595.00
Price includes the industry best and a must have 500 AMP welding ground for aluminum and MIG Welding.
PS-1F with WP-200 chuck.
Above: PS-1F with WP-200 chuck. $1,695 (Saves you $395.00)
PS-1F in production across North America. 
Share by: