Model RS-1-INB Tank Turning Roll The model RS-1-INB tank turning roll is the finest small set of tank and pipe turning rolls on the market, built with the same quality and features as our larger tank turning rolls and pipe turning rolls. Standard Features Model RS-1-INB Tank Turning Roll - Hand held push button pendent control with maintained forward, stop, reverse and infinitely variable speed adjustment.
- On/off electric foot control with forward and reverse switch at control box.
- Adjustable roll to roll center distance for optimum contact angle.
- Heavy duty worm gear direct drive provides non slip power transfer to drive roll.
- All gears and bearings fully enclosed and lubricated for long life and safety.
- Separate drive roll & idler roll for short or long work-pieces.
- L.E.D. digital readout frequency display for adjusting roll speed.
- Stepped down low voltage (24 volt D.C.) operator controls.
- Rubber drive and idler rolls will not mar work-piece surface.
- Highest quality design and workmanship available.
Specifications Model RS-1-INB Tank Turning Roll Input Power
.120 volt A.C. 50/60 Hz single phase Maximum load capacity per set of one drive roll and one idler roll
. 2200 lbs Minimum work-piece diameter
..
..
. 1.97 inches Maximum work-piece diameter
..
..
59 inches Roll speed variable
..
.... 3.3 to 33 inches/min Roll to roll center distance adjustable from
6.3 to 25.6 inches Weight per set
.
. 380 lbs. Back to Tank Turning Rolls Main Page
From a small bench top welding positioner to large 3-axis welding positioners and tank turning rolls, All Fab has a welding positioner or tank turning roll that will fit your needs. | 
