Handy Carriage Controls and Specifications |
Input Power On/Off: Toggle switch to disconnect power to the carriage Travel Direction Left/Stop/Right: three position toggle switch for changing the travel direction of the carriage. Speed Control: Infinitely variable speed regulating dial. Wire Inch/Run/Weld: Three position toggle switch for feeding wire (wire Inch), carriage travel without welding (Run) and carriage travel with welding (Weld). Start: Push button to initial carriage travel and welding Stop: Push button to stop carriage travel and welding. Power Indicating Light Handy Carriage Specifications US Specifications | Metric Specifications |
| Travel speed | 3.9 to 59.0 inches/min @60 hrz 3.9 to 51.2 inches/min @ 50 hz | | Travel speed | 100 to 1500 mm/min @60 hz 100 to 1300 mm/min @50 hz | | Tractive Power | 55 lbf @ .08 inch magnet clearance 33 lbf @ .12 inch magnet clearance | | Tractive Power | 25 kgf @ 2 mm magnet clearance 15 kgff @ 3 mm magnet clearance | | Holding Force | 61 lbs @ .08 inch magnet clearance 35 lbs @ .12 inch magnet clearance | | Holding Force | 25 kgf @ 2 mm magnet clearance 16 kgf @ 3 mm magnet clearance | | Torch Adjustment (Fine) | Right/Left 1.97 Up/Down 1.97 | | Torch Adjustment (Fine) | Right/Left 50 mm Up/Down 50 mm | | Torch Adjustment (Angle) (Straight Torch) | 45 Degrees +3.0/-1.8 | | Torch Adjustment (Angle) (Straight Torch) | 45 Degrees +3.0/-1.8 |
b Back to Handy Carriage Home
Home - All-Fab Advantage - Welding Positioners - Welding Chucks - Pipe Turning Rolls & Tank Turning Rolls
Welding Handy Carriage - MAC welding equipment - Used metalworking machinery
Trade in or sell your surplus machinery - Torch Mounts and Torch Holders - Industry Resource Links
Contact Us
Site Index
From a small bench top welding positioner to large 3-axis welding positioners and tank turning rolls, All Fab has a welding positioner or tank turning roll that will fit your needs.
| 
