1504 Welding Positioner

1504 Welding Positioner $6,995


Model 1504 is Ideal for mechanical pipe shops and manufacturing applications. The model 1504 will dramatically increase your productivity, lower your operating costs and improve weld quality. 

Fully enclosed and lubricated worm gear rotation drive for years of smooth, steady and maintenance free operation. No belts or chains to adjust or replace.  

Heavy Duty, Time Tested, Affordable and Made in the USA.  
USA Flag
The Model 1504 is Made in the U.S.A. 
Capacity

Maximum Load Capacity Table Flat Horizontal position – 1500 pounds

Maximum Load Capacity using outboard roller support - 1500 pounds

Maximum Load Capacity Table Tilted 90 degrees Vertical Position:
Rating @ 4 inch CG load height from table – 1500 pounds
Rating @ 8 inch CG load height from table – 1024 pounds
Rating @ 12 inch CG load height from table – 778 pounds
Rating @ 16 inch CG load height from table – 627 pounds
Rating @ 20 inch CG load height from table – 525 pounds

Maximum Rotation Load Torque – 6000 inch-pound
Rating @ 4 inch CG Load Eccentricity from axis – 1500 pounds
Rating @ 8 inch CG Load Eccentricity from axis – 750 pounds
Rating @ 12 inch CG Load Eccentricity from axis – 500 pounds

CG = Center of Gravity

Rotation

Motor: 1/2 HP DC Variable speed.
Speed Range – Variable from 0.06 to 1.4 RPM
Speed Accuracy – 2 % of base speed.
Rotation Drive – Fully enclosed & lubricated self-locking worm gear.

Tilt 

Tilt Range – 135 degrees forward
Tilt Torque – Manual
Tilt Actuation – 10 inch Dia. hand wheel with self-locking worm gear.
Bearings – HD SAE 660 bronze with grease fittings.
Table 

Round – Laser cut and Blanchard ground 24 inch diameter.
Number of Tee slots – 3 @ 120 degrees
Tee Nut size – 5/8 inch
Centering Hole for chucks & fixtures – 3/4” Diameter x 7/8" depth 
Table Shaft – 2 inch diameter
Inherent overhang – 4.91 inches

Welding Ground Conduction – 500 Amps thru spring loaded mechanical ground.

Primary Input power – AC 115 volts 60 Hz Single Phase 15 Amp.

Controls 

External Nema 4X Control box – With Power On, Stop and Overload indicator lights.
Speed Control – One turn potentiometer
Directional Control – Forward/Reverse switch with dynamic braking resistor.
Start Stop Switch – For safety must be used to start if power is lost.
Overload Protection – 8 Amp motor fuse.
Foot Switch – Heavy Duty Remote start/stop with 25 feet of cable.
Cables – All motor, foot control and input power cable Heavy Duty 600 volt.

Frame – Fixture welded for accuracy, powder coated, Qty. 4 anchor bolt holes.

Approximate shipping Weight – 1150 pounds, crate size 48” x 48” x 48”

Model 1504 Options: 

MT 16 Welding Chuck
MT16 Welding Chuck
WPT-600 Welding Chuck
WPT-600 Welding Chuck
Outbboard Roller Support
RS-15 Outboard Roller Support
1504 Welding Positioner
Above: Model 1504 Welding with optional MT 16 Welding Chuck
Below: Model 1504 Welding Positioner shown with optional WPT-600 Welding Chuck.
1504 Welding Positioner
1504 Welding Positioner
1504 Welding Positioner
1504 Welding Positioner
Below: Model 1504 Welding Positioners in Production.
Share by: